Aerotec Machine Tool
Vertical Machining CenterRMV Series
Super High Precision Tapping Center

STANDARD ACCESSORIES
  • Spindle air chilling
  • Spindle oil chilling
  • Spindle taper air below Spindle taper air below
  • Automatic pallet change Automatic pallet change
  • Akira Seiki patented chip proof and dectetion system under pallet
  • Full enclosure splashguard with top cover
  • Coolant system next to spindle nose
  • Chip flushing system
  • Akira Seiki patented pull stud 24pcs
  • Working light
  • Machine & control operation manuals
  • Remote control MPG
  • Operation status lights (3 colors)
  • Heat exchanger for eletrical cabinet
  • Automatic lubrication
  • Transformer for 380V or 415V power input
  • 1 year mechanism warrantee
  • 2 years warrantee for controller
STANDARD ACCESSORIES
  1. Fanuc 0iMC Control + 8.4" LCD
  2. Spindle oil chilling
  3. Coolant through spindle with 20bar filtration system (hollow motor shaft)
  4. Spindle speed: 20-22000 RPM for Fanuc system included upgrade to 0iMC to drive 22000rpm amplifier, motor upgrade, oil cooler and ceramic ball bearing
  5. Spindle speed: 20-20000 RPM for Mitsubishi M64 system included oil cooler and ceramic ball bearing
  6. Spindle speed: upgrade to 15000 RPM for Fanuc system included motor upgrade, oil cooler and ceramic ball bearing
  7. Spindle speed: upgrade to 15000 RPM for Mitsubishi system included motor upgrade, oil cooler and ceramic ball bearing
  8. Scrape type chip conveyor, 1200mm disposal height
  9. Oil chilling spray for delicate cut
  10. 4th axis interface preparation for single pallet (inner wiring and software)
  11. Rotary table integration for single or both pallet
  12. Pneumatic auto door
  13. Pneumatic fixture interface preparation (single pallet)
  14. Pneumatic fixture interface preparation (twin pallet)
Model:AS-500
single pallet		RMV 500APC
twin pallet		RMV 700APC
twin pallet
CNC PackageCNC Unit
Akira Mi 645
(M70A platform)		Fanuc 0iMate
Akira Mi 645
(M70A platform)		Fanuc 0iMate
Akira Mi 645
(M70A platform)		Fanuc 0iMC
Display
8.4" color LCD7.2" mono LCD
8.4" color LCD7.2" mono LCD
 8.4" color LCD
CPU Level
64bit486 32bit
64bit486 32bit
64bit486 32bit
Basic control axis
4 axis3 axis
4th axis indexing by M code
4 axis
5th axis indexing by G code		3 axis
4th axis indexing by M code
4 axis
5th axis indexing by G code		4 axis
5th axis by M code
Initial memory 1/4 MB 1/4 MB 1/4 MB
Program store 400 400 400
Memory card interface standard standard standard
Ethernet interface
standardoptional
standardoptional
standardoptional
Work AreaX/Y/Z travel (mm) 500/280/280 500/280/280 700/400/400
Working table (mm*mm) 600*300 500*300 700*400
Automatic pallet change time not available 1.5 sec / 180 degree (60Hz) 2.5 sec / 180 degree (60Hz)
SpindleSpindle motor max. output ( peak. 2 min rated) 10 HP 10 HP 15 HP / 10 min
Max spindle speed 15000rpm
small steel ball bearing		 15000rpm
small steel ball bearing		 12000rpm
small steel ball bearing
Time to reach max spindle speed
0.4 secs0.5 secs
0.4 secs0.5 secs
 2.3 secs
Taper size HSK-40 HSK-40 HSK-63
FeedRapid feed of X / Y / Z axis 96 / 60 / 96 m/min 60 / 60 / 96 m/min 48 / 60 / 96 m/min
Acceleration 1.2 / 1.0 / 1.2 G 1.2 / 1.0 / 1.2 G 1.0 / 1.0 / 1.2 G
Max rigid tapping speed (refer to tool application) 6000rpm 6000rpm 4000rpm
ATCATC unit arm type arm type arm type
Tool magzine deducted gear motor drive servo drive deducted gear motor drive
Tool storage capacity 24+1 24+1 24+1

Copyright © 2007 AEROTEC MACHINE TOOL SALES, All right reserved (www.aerotecmachinetool.com)