Aerotec Machine Tool

Models	1043
Diameter of Column	10-1/4"(260 mm)
Max. Distance from Column Surface to Spindle Center	42-5/16"(1,100 mm)
Min. Distace from Column Surface to Spindle Center	9-5/8"(245 mm)
Travel of Spindle Head	33-5/8"(855 mm)
Max. Distance from Base Surface to Spindle End	50-3/8"(1,280 mm)
Min. Distance from Base Surface to Spindle End	12-5/8"(680-250 = 430 mm)
Elevating Height of Arm	24"(600 mm)
Effective Area of Table	24-3/4" x 20-1/2" x 16-1/2"(630 x 520 x 420 mm)
Dimensions of Base	67-3/4" x 28" x 6-1/2"(1,720 x 710 x 165 mm)
Taper Hole Spindle	M.T. #4
Stroke of Spindle	9"(230 mm)
RPM of Spindle (RPM x Steps)	44-1500 RPM x 12 Steps
Feed of Spindle (rev. x Steps)	0.002", 0.0035", 0.0059"(0.05, 0.09, 0.15 mm) x 3 Steps
Main Motor (2 Speed motor)	3 HP
Elevating Motor	1 HP
Coolant Pump	1/8 HP
Max. Machine Height from Floor	100"(2,540 mm)
Net / Gross Weight Approx.	3,960(1,800 kg.) 4,290 lb(1,950 kg.)
Packing Measurement (L x W x H)	74" x 34" x 89"(1,880 x 860 x 2,260 mm)

Models	1148
Diameter of Column	11-3/16"(300 mm)
Max. Distance from Column Surface to Spindle Center	48-1/2"(1,230 mm)
Min. Distace from Column Surface to Spindle Center	13-3/8"(340 mm)
Travel of Spindle Head	35"(890 mm)
Max. Distance from Base Surface to Spindle End	54"(1,370 mm)
Min. Distance from Base Surface to Spindle End	19-3/8"(490 mm)
Elevating Height of Arm	34-5/8"(880 mm)
Effective Area of Table	27-5/8" x 19-5/8" x 15-3/4"(700 x 500 x 400 mm)
Dimensions of Base	67-11/16" x 27-15/16" x 6-1/2"(1,720 x 710 x 165 mm)
Taper Hole Spindle	M.T. #4
Stroke of Spindle	9-7/8"(250 mm)
RPM of Spindle (RPM x Steps)	40-1500 RPM x 12 Steps
Feed of Spindle (rev. x Steps)	0.002", 0.0035", 0.0059"(0.05, 0.09, 0.15 mm) x 3 Steps
Main Motor (2 Speed motor)	3 HP
Elevating Motor	1 HP
Clamping Motor	1 HP
Coolant Pump	1/8 HP
Max. Machine Height from Floor	109-1/2"(2,780 mm)
Net / Gross Weight Approx.	4,620 lb.(2,100 kg.) 4,950 lb.(2,250 kg.)
Packing Measurement (L x W x H)	80" x 39" x 89"(2,030 x 990 x 2,260 mm)