VICTOR 2000 SERIES
SPECIFICATIONS
| Models |
S2040B |
S2060B |
| Swing Over Bed |
20"(510 mm) |
| Swing Over Cross Slide |
12-19/32"(320 mm) |
| Swing Over Gap |
28-29/32"(724 mm) |
| Width of Bed |
11-7/16"(300 mm) |
| Distance Between Centers | 40"(1,000
mm) | 60"(1,500 mm) |
| Spindle Bore Diameter |
3-7/32"(82 mm) |
| Taper of Spindle Bore |
M.T. #7 |
| Spindle Nose |
D1-8 |
| Range of Spindle Speed |
15 - 1,500 RPM (12 Steps) |
| Range of Inch Threads |
2 - 56 TPI x 44 kinds |
| Range of Metric Threads |
0.5 - 14 mm x 24 kinds |
| Range of Longitudinal Feeds |
0.002" - 0.032"/rev.(0.6 - 0.82
mm/rev.) |
| Range of Cross Feeds |
0.001" - 0.0094"/rev.(0.02 - 0.24
mm/rev.) |
| Leadscrew Diameter and Pitch |
1-3/8" 4 TPI(35 mm) |
| Tailstock Sleeve Bore Taper |
M.T # |
| Tailstock Spindle Travel |
5"(127 mm) |
| Tailstock Spindle Diameter |
2-1/4"(58 mm) |
| Main Motor |
10 HP (7.5 Kw) 3 PH |
| Coolant Pump |
1/8 HP (0.1 Kw) 3 PH |
| Net/Gross Weight | 4,100/4,878 lb.(1,880/2,220
kg.) | 4,765/5,870 lb.(2,165/2,668 kg.) |
| Packing Dimensions (L x W x H) |
96" x 44" x 65"(2,440 x 1,120 x 1,650
mm) | 118" x 44" x 65"(3,000 x 1,120 x 1,650 mm) |
. Specifications are subject to change without notice for
further design improvements
STANDARD MACHINE ACCESSORIES
| 1. Center Sleeve M.T. #5 |
5. Operational Manual |
9. Coolant System |
| 2. Center M.T. #5 |
6. Leveling Bolts and Pads |
10. Chuck Cover |
| 3. Oil Gun |
7. 4-Way Tool Post |
| 4. Tool Box and Tools |
8. Halogen Work Light |
OPTIONAL MACHINE ACCESSORIES
| 1. 3-Jaw Chuck (D1-8) |
6. Drive Plate (D1-8) |
11. 4-Way Tool Post |
| 2. 4-Jaw Chuck (D1-8) |
7. Taper Turning Attachement |
12. Micro Carriage Stop |
| 3. Steady Rest (with Brass tips 5-1/2") |
8. Quick Change Tool Post and Holder |
13. 4-Position Carriage Stop |
| 4. Follow Rest |
9. Live Center: M.T #5 |
14. American Tool Post |
| 5. Face Plate (D1-8) |
10 . 5C Collet Closer |
15. Full Lenght Splash Guard |
To order or information call AEROTEC
Victor 2000E Series
To order or information call AEROTEC
Victor 2000S Series
SPECIFICATIONS
|
Models | 2040S |
2060S | 2080S |
20120S |
| Swing over bed | 20"(510 mm) |
| Swing over cross-slide | 13"
(330mm) |
| Distance between center | 40"(1000mm) |
60"(1500mm) |
80"(2000mm) |
120"(3000mm) |
| Width of bed | 15¾"(400mm) |
| Spindle bore | Ø3-1/8"
(Ø 80mm) |
| Spindle nose | D1-8 Camlock |
| Spindle taper | M.T. # 7 |
| Spindle speeds (12 Steps) | 20~1550 rpm |
| Inch Thread | 2 - 112 T.P.I (60 Kinds) |
| Metric Thread | 0.2 - 14mm (60 Kinds) |
| Module Pitch Threads | 0.2 - 7 M.P. (50 Kinds) |
| D.P. Threads | 4 - 112 D.P.I(50 Kinds) |
| Longitudinal Feed Range | 0.0014"-0.0387"/rev
(0.037~1.04mm/rev) |
| Cross Feed Range | 0.0007"-0.01935"/rev
(0.0185~0.52mm/rev) |
| No. of cross longitudinal feed | 50 |
| Tailstock spindle diameter | 2-15/16"
(75mm) |
| Max. tailstock spindle travel | 6-5/16"
(160mm) |
| Tailstock spindle bore taper | M.T. # 5 |
| Main Motor | 10 HP, 3 PH |
| 10 HP, 3 PH | 1/8 HP, 3 PH |
| Rapid Feed Motor | N/A | N/A |
N/A | 1/2 HP 3 PH |
| Packing Size (L X W x H ) | 89"x44"x65" |
110"x44"x65" | 140"x44"x65" |
185"x44"x65" |
| Gross machine weight | 4660 lbs |
5320 lbs | 5870 lbs |
7230 lbs |
. Specifications are subject to change without notice for further design improvements
STANDARD MACHINE ACCESSORIES
|
1. Center sleeve |
7. Leveling screw and pads |
12. Operation manual & parts list |
|
2. Tool box with kits |
8. Thread dial indicator |
13. Coolant system |
|
3. Hex wrenches |
9. M.T. No 5 dead center |
14. Lever change inch/metric gear box |
|
4. Gun oiler |
4. Gun oiler |
15. Inch/metric dual dials |
|
5. Change gear |
11. 10 HP 3 PH motor |
16. Work light |
|
6. Rapid feed for 20120S only |
OPTIONAL MACHINE ACCESSORIES
|
1. Four-way toolpost |
7. Chuck cover ( or with micro switch) |
13. Taper turning attachment |
|
2. Quick change toolpost |
8. Chuck back plate |
14. Micro saddle stop |
|
3. American toolpost |
9. Steady rest 3"~8" |
15. 4-position saddle cover stop |
|
4. Rear toolpost |
10. Follow rest |
16. Work light |
|
5. 3-jaw scroll chuck |
11. Full length splash guard |
17. Fast lever 5C collet closer |
|
6. 4-jaw independent chuck |
12. Face plate |
18. Live center with replaceable tips |
For more information please call AEROTEC
